04.01.14 - Ref 6.1, SQ component kit.

 

14.11.13 - Quattro Class H, the Active Evoltuion.

 

01.11.13 - MWSPL finals, the definition of LOUD with B².

 

22.10.13 - Unified Finals, Multiple wins for the B² team guys..

 

18.10.13 - Prepping for Unified Finals - Huntsville.

 

07.10.13 - European Finals
B² audio ranging first.

 

05.10.13 - IS series
Top performance & best pricing.

 

03.10.13 - Aiming higher with new Super tweeters.

 

 

 

Zero1

Manual

 

Blinded by the white.... 

 

The Zero1 will blind you with its presence & appearance. The Hi-Ef Class D circuit ensures optimum performance within the operational voltage of the amplifer.

 

The small footprint of the Zero1 will make it fit nearly everywhere, making it a perfect daily driver amplifier for 12V systems. Bass remote with clip indicator & the easy gain, frequency & boost settings for slave1 / slave2 amplfiers makes it simple running various Zero1's while having full control from your drivers seat.


With nearly 5kw at 14.4V (<5% THD) there's an obvious reason for the dual 0 GA power & ground input. The Zero1 welcomes a new era for compact power!

 

Frequency Response: 15 Hz ~ 250 Hz
Signal to Noise Ratio:   100 dB
Input Sensitivity: 6 ~ 0.2 V
Crossover:      24 dB / Oct
Low Pass Filter:  35 Hz ~ 250 Hz
Subsonic Filter: 10 Hz ~ 50 Hz
Bass Boost:      0 ~ 9 dB
Bass Boost Frequency:   30 Hz ~ 80 Hz
Phase:  0 ~ 180°
Damping Factor: 300<
Power Terminal gauge: 0 GA x 2
Fuse Rating: 350 A
Operational voltage: 9 V ~ 15 V
Dimensions: 18.9" x 11.8" x 2.4"

 

 

  12V 14.4V 15V Drop* 14.4V Linked 14.4V
Power @ 4 Ω: 1 x 900 w 1 x 1400 w   1 x 2800 w 1 x 4800 w
Power @ 2 Ω: 1 x 1600 w 1 x 2400 w   1 x 4800 w 1 x 8400 w
Power @ 1 Ω: 1 x 2700 w 1 x 4000 w 1 x 4500 w* 1 x 6000 w  

 

 

*In order to get the full power output of the amplifier, it is crucial that your electical system is correctly 
(over)dimensioned. Failure to upgrading, will constrain the power output & lower the effeciency which can cause damage to the amplifier & void the warranty, this also includes loads below min. of what is written in the manual. Read the manual thoroughly before installing!(Drop - Dynamic Rated Output Power).